In this post, we’ll break down the filling methods for four common types of refillable devices:

1. Bottom Fill Vape Pods – These pods require you to refill them from the bottom, typically by opening a small fill port at the base. They are discreet and easy to use, making them a popular choice for beginners.

2. Top Fill Vape Pods – These pods have a convenient top-fill system, allowing you to refill without removing the pod from the device. They are designed for quick and mess-free refills, ideal for on-the-go vaping.

3. Bottom Fill Vape Tanks – These tanks are filled from the bottom by unscrewing the base. Although they take a bit more effort to fill, they are known for producing excellent flavor and vapor.

4. Top Fill Vape Tanks – These tanks are user-friendly, with a top-fill design that makes refilling straightforward and quick. They are favored by experienced vapers who prioritize ease of use and convenience.

By the end of this guide, you’ll have a clear understanding of how to properly fill each type of device, ensuring a hassle-free process and a smooth, flavorful vaping experience every time.

1. Top Fill Vape Pods

Top fill vape pods are user-friendly, with a fill port on the top of the pod, making them convenient and mess-free.

Step-by-Step Instructions:

1. Remove the Pod from the Device: Detach the pod from the main device.

2. Open the Top Cap or Mouthpiece: Depending on the pod design, twist or lift the top cap or mouthpiece to reveal the fill port.

3. Fill with E-Liquid: Insert the nozzle of the e-liquid bottle into the fill hole. Squeeze the bottle gently to fill the pod.

   • Tip: Be careful not to overfill, and avoid getting e-liquid into the central airflow tube (if present).

4. Close the Top Cap: Once filled, securely close the top cap or snap the mouthpiece back in place.

5. Reinsert the Pod: Put the pod back into the device.

6. Wait to Saturate: Allow 5-10 minutes for the coil to soak in the e-liquid if it's a fresh coil or a new pod.

2. Bottom Fill Vape Pods

Bottom fill vape pods are refillable pods where the fill port is located at the bottom of the pod. Here’s how to fill them:

Step-by-Step Instructions:

1. Remove the Pod: Take the pod out of the device by pulling or snapping it out.

2. Locate the Fill Port: Turn the pod upside down. Look for a small rubber or silicone plug at the bottom of the pod. This is the fill port.

3. Open the Fill Port: Carefully lift the plug using your fingernail or a small tool to expose the fill hole.

4. Fill with E-Liquid: Insert the e-liquid bottle’s nozzle into the fill hole and gently squeeze the bottle. Fill slowly to avoid spills, and stop before it reaches the top.

   • Tip: Leave a small air gap at the top for better airflow and to avoid leakage.

5. Seal the Fill Port: Securely push the rubber plug back into place to close the fill port.

6. Reinsert the Pod: Insert the filled pod back into the device until it clicks or fits snugly.

7. Prime and Wait: If you’ve just changed the coil or it’s a new pod, let the e-liquid sit for about 5-10 minutes to saturate the coil.

3. Bottom Fill Vape Tanks

Bottom fill vape tanks require you to fill the tank from the bottom by detaching it from the battery. It can be slightly more time-consuming, but it’s straightforward.

Step-by-Step Instructions:

1. Detach the Tank from the Device: Unscrew the tank from the battery or mod.

2. Unscrew the Base of the Tank: Hold the tank upside down and unscrew the bottom part (base) to access the filling area.

3. Fill with E-Liquid: Place the nozzle of the e-liquid bottle along the side of the glass tank and fill it with e-liquid. Avoid the central airflow tube to prevent leaks.

   • Tip: Stop filling just before reaching the top of the glass.

4. Reattach the Base: Carefully screw the base back onto the tank. Make sure it's tight but not overly tightened.

5. Attach the Tank to the Device: Screw the filled tank back onto the device.

6. Prime and Wait: If you've replaced the coil, let the e-liquid sit for 5-10 minutes to prime the coil.

4. Top Fill Vape Tanks

Top fill vape tanks are designed to be easy to fill from the top, making them a favorite for convenience.

Step-by-Step Instructions:

1. Open the Top Cap: Some top-fill tanks have a twist-off cap, while others have a slide-to-fill mechanism. Follow the instructions specific to your tank to open the top cap.

2. Locate the Fill Port: Look for the fill holes, usually marked by an opening at the edge. Avoid the central airflow hole.

3. Fill with E-Liquid: Insert the nozzle of the e-liquid bottle into the fill hole and gently squeeze to fill the tank.

   • Tip: Fill up to the maximum fill line, but avoid overfilling to prevent leakage.

4. Close the Top Cap: Securely twist or slide the top cap back into place.

5. Prime the Coil: If it’s a new coil, let the e-liquid sit for about 5-10 minutes to soak into the wick.

6. Start Vaping: Your top-fill tank is now ready to use!

Final Tips for Filling Vape Devices

• Always ensure the tank or pod is securely sealed after filling to avoid leaks.

• Keep the e-liquid bottle nozzle clean to prevent contamination.

• Never vape immediately after filling a new coil; wait a few minutes for proper wicking.

• If you experience leaking, check the seals and gaskets for any damage or loose connections.

By following these step-by-step instructions, you’ll be able to fill your vape device correctly, minimizing mess and maximizing your vaping enjoyment. Happy vaping!